When setting up an IP Range Auto Login in PAC, please follow the below guidelines:


The correct format for an IP Range is:

192.168.0.1-192.168.0.255


This means any device with the IP address between the above is valid.(192.168.0.1, 192.168.0.2, 192.168.0.3 etc all the way up to 192.168.0.255)


You need to be sure to put the full IP address of the first valid IP followed by a - (no space before and after) and then the last valid full IP address. Anything between will be checked as valid and will be granted access.


Note: please make sure that the numbers do not go outside the bounds of an IP address, 0 being the lowest, 255 being the highest.